Codemark Certified Organisations

Fletcher Insulation (VIC) Pty Ltd

Certificate Number28885842BD4DA2C0CA25807C00304ADD
Type of CertificationProduct Certification
StatusActive
Organisation NameFletcher Insulation (VIC) Pty Ltd
Suburb / CityHomebush
CountryAustralia
CertificationCertificate: CM30006 Rev C Product description Fletcher Insulation Pink Batts. Product purpose or use: Batts can be installed as ceiling, walls or floor insulation in residential or commercial projects. Complies with the National Construction Code 2016: · Volume One ? J1.2(a), contributes to J1.3 and J1.5 as per the material R?values as listed on Table 1. · Volume Two ? 3.12.1.1(a), contributes to 3.12.1.2, 3.12.1.4, 3.12.1.5 (a) and 3.12.1.6 as per the material R?values as listed on Table 1. State Additions or Variations · Volume One NSW Section J for Class 2 buildings and Class 4 parts does not apply but is used to support and complement BASIX. · Volume Two NSW Part 3.12 does not apply but is used to support and complement BASIX. · Volume One NT Section J: for Class 2 building and Class 4 parts is replaced by BCA 2009 Section J. · Volume Two NT Part 3.12 is replaced by BCA 2009 Volume Two Part 3.12. · Volume One QLD Section J: for Class 2 building is replaced by BCA 2009 Section J. · Subject to the following conditions and limitations: 1. Product selection, and incorporation into the building design, shall be made by a person who: · Has received training in the use, application and technical aspects of the product; and · Has ready access to all to the relevant technical information related to the product use. 2. Product installation shall be carried out in accordance with ICANZ Installation Handbook, Installation Guide Part 2, Version 4, October 2016 and the Fletcher Insulation Installation Pink Insulation Batts Guidelines IG6_Revision_0_Issue Date 18/03/2016 by a competent person under the direction of a Builder, both of whom: · Have received training in the product installation and been issued a ICANZ Insulation Installer Certificate; and · Having issued an Installation Guarantee Certificate. Refer to Table 1 on certificate. End of the document
Certification Standard(s)BCA - all clauses
Certification Code(s)
Date Certified01/12/2016
Certified byGlobal-Mark Pty Ltd