Codemark Certified Organisations

Fletcher Insulation (VIC) Pty Ltd

Certificate NumberFCE6D58A9F8104AFCA25807C002FDE7D
Type of CertificationProduct Certification
StatusActive
Organisation NameFletcher Insulation (VIC) Pty Ltd
Suburb / CityHomebush
CountryAustralia
CertificationCertificate -CM30007-RevC Product description: Fletcher Insulation Permastop building blankets are foil faced, provided in roll of 1200 mm X 15 m. Product purpose or use Fletcher Insulation Permastop Building Blankets can be installed as roof insulation in residential or commercial projects. 100mm Permastop may be used with 75mm RoofRack or 85mm Roof Razor spacer on commercial roofs and/or 130mm Permastop may be used with 100mm RoofRack or 115mm RoofRazor Spacer. Complies with the National Construction Code 2016: · Volume One ? J1.2(a), contributes to J1.3 as per the material R?values as listed on Table 1. · Volume Two ? 3.12.1.1(a), contributes to 3.12.1.2, and 3.12.1.6 as per the material R?values as listed on Table 1. State Additions or Variations · Volume One NSW Section J for Class 2 buildings and Class 4 parts does not apply but is used to support and complement BASIX. · Volume Two NSW Part 3.12 does not apply but is used to support and complement BASIX. · Volume One NT Section J: for Class 2 building and Class 4 parts is replaced by BCA 2009 Section J. · Volume Two NT Part 3.12 is replaced by BCA 2009 Volume Two Part 3.12. · Volume One QLD Section J: for Class 2 building is replaced by BCA 2009 Section J. Subject to the following conditions and limitations: 1. Product cannot be used as sarking. 2. Product selection, and incorporation into the building design, shall be made by a person who: · Has received training in the use, application and technical aspects of the product; and · Has ready access to all to the relevant technical information related to the product use. 3. Product installation shall be carried out in accordance with Fletcher Insulation Permastop Installation Guidelines IG1_Revision_0_Issue Date 25/02/2016 by a competent person under the direction of a Builder, both of whom: · Have received training in the product installation and been issued a ICANZ Insulation Installer Certificate; and · Having issued an Installation Guarantee Certificate.
Certification Standard(s)BCA - all clauses
Certification Code(s)
Date Certified01/12/2016
Certified byGlobal-Mark Pty Ltd